FAS9500 systems
Install and setup
Start here: Choose your installation and setup experience
You can choose from different content formats to guide you through installing and setting
up your new storage system.
•
Quick steps
A printable PDF of step-by-step instructions with live links to additional content.
•
Video steps
Video step-by-step instructions.
•
Detailed steps
Online step-by-step instructions with live links to additional content.
Quick steps - FAS9500
This topic gives graphic instructions for a typical installation of your system from racking
and cabling, through initial system bring-up. Use this content if you are familiar with
installing NetApp systems.
Access the Installation and Setup Instructions PDF poster:
FAS9500 Installation and Setup Instructions
Video steps - FAS9500
There are two videos - one showing how to rack and cable your system and one showing
an example of using the System Manager Guided Setup to perform initial system
configuration.
Video one of two: Hardware installation and cabling
The following video shows how to install and cable your new system.
<div class="aspect-ratio"><iframe frameborder="1" height="400"
scrolling="auto"
src="https://netapp.hosted.panopto.com/Panopto/Pages/embed.aspx?id=ab45062
1-9e1c-44a7-befa-ae7c01708d9e" width="711"> </iframe></div>
Animation - Animated Installation and setup instructions - FAS9500
683
To Next Page
Loading...
