NetComm NF13ACV User Manual

36
NetComm Wireless AC1200 WiFi Gigabit Router with Voice
www.netcommwireless.com
UM-00013 v1.0
VPN
IPSec
IPSec operates on Layer 3 of the OSI model and as such can protect higher layered protocols. IPSec is used for both site to site
VPN and Remote Access VPN. The NF13ACV router supports IPsec end points and can be configured with Site to Site VPN
tunnels with third party VPN routers.
Figure 30 - IPSec settings
OPTION
DEFINITION
VPN-IPSec
Enables/disables the IPSec VPN service.
NetBIOS over IPSec
When enabled, this passes the NetBIOS protocol over the IPSec VPN.
NAT Traversal
When enabled, this allows the IPSec protocol to traverse the network address translation of the router.
Max. number of tunnels
Sets the maximum number of tunnels that may be used over the IPSec connection.
Table 12 - IPSec

NetComm NF13ACV Specifications

General

Brand	NetComm
Model	NF13ACV
Category	Network Router
Language	English