NetComm Wireless NF17ACV User Guide
Select a
Service or
custom
Server
Select a pre-configured port forwarding rule or choose custom server to create your own port forwarding rule.
Enter the IP address of the local server/host.
Enter the starting external port number (when custom server is selected). When a predefined service is selected this field will
be completed automatically.
Enter the ending external port number (when custom server is selected). When a predefined service is selected this field will be
completed automatically.
Options include TCP, UDP or TCP/UDP.
Enter the starting internal port number (when custom server is selected). When a predefined service is selected this field will be
completed automatically.
Enter the ending internal port number (when custom server is selected). When a predefined service is selected this field will be
completed automatically.
Click Save/Apply to save your settings when you have finished creating virtual servers.
Port Triggering
Some applications require specific ports in the Router’s firewall to be open for access by remote parties. Port Triggering opens up
the ‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the
‘Triggering Ports’.
The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using
the ‘Open Ports’. A maximum 32 entries can be configured.
To add a Trigger Port, press the Add button.
To Next Page
Loading...
Need help?
General
