NetComm NF17ACV User Manual

80
NetComm Wireless NF17ACV User Guide
www.netcommwireless.com
v1.0
c) Enter a name of 15 characters or less to reflect the device that will have high priority QoS, e.g. PC1HighPriority.
d) Set the Enable option to Enable.
e) Set the Interface (Australian customers use atm0(0_8_35), NZ customers use atm0(0)0)100)).
f) Enter a Precedence. For the highest priority, set it to 1. For the lowest priority use 3.
g) Set the DSL Latency as Path0.
h) Click the Save/Apply button.
Low Priority QoS Queue Configuration
a) Select Advanced > Quality of Service > Queue Config.
b) Click the Add button.
c) Enter a name of 15 characters or less to reflect the device that will have low priority QoS e.g. PC2LowPriority.
d) Set the Enable option to Enable.
e) Set the Interface (Australian customers use atm0(0_8_35), NZ customers use atm0(0)0)100)).
f) Enter a Precedence. For the lowest priority, set it to 3. For the highest priority use 1.
g) Set the DSL Latency as Path0.
h) Click the Save/Apply button.

NetComm NF17ACV Specifications

General

Brand	NetComm
Model	NF17ACV
Category	Modem
Language	English