NetComm NF17ACV - Page 37

www.netcommwireless.com
NetComm Wireless NF17ACV User Guide
37
v1.0
FIELD
DESCRIPTION
Select an Application or Custom
Application
A user can select a pre-configured application from the list or select the Custom Application option to
create custom application settings.
Trigger Port Start
Enter the starting trigger port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Trigger Port End
Enter the ending trigger port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Trigger Protocol
Options include TCP, UDP or TCP/UDP.
Open Port Start
Enter the starting open port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Open Port End
Enter the ending open port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Open Protocol
Options include TCP, UDP or TCP/UDP.
DMZ Host
The NF17ACV will forward IP packets from the Wide Area Network (WAN) that do not belong to any of the applications configured
in the Virtual Servers table to the DMZ host.
Enter the Host’s IP address and click Apply to activate the DMZ host. To deactivate the DMZ Host function clear the IP address
field and press the Save/Apply button.
Multi Nat
Here you can define your own NAT rule containing One2One, One2Many, Many2One and Many2Many.
Click the Add button to add a new rule.