NetComm ROUTER WITH VOICE 3G10WV

86 – 3G10WV HSPA Wi-Fi Router with Voice
[--nkey2 <keyStr>] [--nkey3 <keyStr>]
[--keyidx <2|3>]
wlan security psk / psk2 / psk2mix
[--wpaenc <tkip|aes|tkip+aes>] [--rekey <interval>]
[--pskey <”pskeyStr”>]
[--wep <enabled|disabled>] [--keybit <64|128>]
[--nkey2 <keyStr>] [--nkey3 <keyStr>]
[--keyidx <2|3>]
Options:
--wep <enabled|disabled>
Description: enable or disable WEP encryption
--keybit <64|128>
Description: Set the WEP encryption strength
--nkey1 <keyStr>
--nkey2 <keyStr>
--nkey3 <keyStr>
--nkey4 <keyStr>
Description: Set the WEP key.
Note: 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys.
13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys
--keyidx <1|2|3|4>
Description: Set the current WEP Key index.
--rasip <serverIp>
Description: Set the RADIUS server IP address.
--raspt <portVal>
Description: Set the RADIUS server port.
Valid value: 1~65535
Default value: 1812
--raskey <raskeyStr>
Description: Set the RADIUS Key.
Valid value: string of 79 characters.
--wpaenc <tkip|aes|tkip+aes>
Description: Set the WPA encryption