EasyManua.ls Logo

NetComm Wireless Router NB504 - Chapter 3: Connecting the Router; 3.1 System Requirements; 3.2 Installation Environment Requirements

NetComm Wireless Router NB504
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NB504 User Guide YML864Rev1
10 www.netcomm.com.au
CHAPTER 3: CONNECTING THE ROUTER
3.1 System Requirements
• Broadband Internet Access Service (DSL/Cable/Ethernet)
• One DSL/Cable modem that has an RJ45 connector
• Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors
• TCP/IP protocol must be installed on each PC
• Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later
3.2 Installation Environment Requirements
• Do not place in direct sunlight or near a heater or heating vent
• Do not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all sides of the
router
• Well ventilated (especially if it is in a closet)
• Operating temperature: 0
o
C~40
o
C (32
o
F~104
o
F)
• Operating Humidity: 10%~90%RH, Non-condensing