5.7.4 UPnP
The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to access the
local host resources or devices as needed. UPnP devices can be automatically discovered by the UPnP
service application on the LAN. You can configure UPnP on this page that shown in figure 5-30:
Figure 5-30 UPnP Settings
• Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable button. As
allowing this may present a risk to security, this feature is disabled by default.
• Current UPnP Settings List - This table displays the current UPnP information.
• App Description – The description provided by the application in the UPnP request
• External Port - External port, which the router opened for the application.
• Protocol - Which type of protocol is opened.
• Internal Port - Internal port, which the router opened for local host.
• IP Address - The UPnP device that is currently accessing the router.
• Status - Either Enabled or Disabled, “Enabled” means that port is still active, otherwise, the port is
inactive.
Click Refresh to update the Current UPnP Settings List.
To Next Page
Loading...
Need help?
General
