YML864 Rev1 NB504 User GuideNB504 User Guide
www.netcomm.com.au 73
5.12.2 Firmware
The page (shown in figure 5-54) allows you to upgrade the latest version firmware to keep your router up-to-
date.
Figure 5-54 Firmware Upgrade
New firmware is posted at www.netcomm.com.au and can be downloaded for free. If the router is not
experiencing difficulties, there is no need to upgrade firmware, unless the new firmware supports a new
feature you need.
Note: When you upgrade the router’s firmware, you will lose current configuration settings, so make sure you backup the router’s
settings before you upgrade its firmware.
To upgrade the router’s firmware, follow these instructions:
1. Download the latest firmware upgrade file from the Netcomm website (www.netcomm.com.au).
2. Click Browse to view the folders and select the downloaded file.
3. Click the Upgrade button.
• Firmware Version - Displays the current firmware version.
• Hardware Version - Displays the current hardware version. The hardware version of the upgrade file
must accord with the current hardware version.
Note:
1. Do not turn off the router or press the Reset button while the firmware is being upgraded.
2. The router will reboot after the Upgrading has been finished.
3. Do not use wireless connection when updating firmware.
4. Turn off any firewall or anti-virus program
To Next Page
Loading...
Need help?
General
