Name: Netgate SG-2100
Brand: Netgate
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Security Gateway Manual SG-2100

7.7.5 Serial Output Stops After the BIOS

If serial output is shown for the BIOS but stops afterward, check the following items:

Terminal Speed Ensure the terminal program is conﬁgured for the correct speed for the installed operating system.

(See No Serial Output)

Device OS Serial Console Settings Ensure the installed operating system is conﬁgured to activate the serial console

and that it is conﬁgured for the proper console (e.g. ttyS1 in Linux). Consult the various operating install

guides on this site for further information.

Bootable Media If booting from a USB ﬂash drive, ensure that the drive was written correctly and contains a bootable

operating system image.

Questions and Answers:

Need help?

Do you have a question about the Netgate SG-2100 and is the answer not in the manual?

Netgate SG-2100 Specifications

General