Name: Netgate SG-2100
Brand: Netgate
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Security Gateway Manual SG-2100

Warning: The M.2 SATA card is keyed. Do not force it into the slot.

Fig. 3: Insert the M.2 SATA Drive at about a 30° Angle

4. Gently push down the M.2 SATA card and replace the screw into the standoff.

5. Place the cover back on and turn the Netgate 2100 over. Replace the four (4) T10 Torx case screws. Be careful

not to crossthread the screws or overtighten them.

6. Reinstall the pfSense

Plus software on the new M.2 SATA drive.

7. Restore the conﬁguration backup if one is available.

Questions and Answers:

Need help?

Do you have a question about the Netgate SG-2100 and is the answer not in the manual?

Netgate SG-2100 Specifications

General