NETGEAR AirCard 797S

You can add a Wi-Fi device to your Wi-Fi network manually. If the device that you are
adding is WPS enabled, you can use the WPS method to connect the device without
using the Wi-Fi password.
Connect Using the Wi-Fi Password
To connect using the Wi-Fi password:
1.
On the Wi-Fi device, view the list of available Wi-Fi networks.
2. Connect to the network that corresponds to your mobile hotspot network as displayed
on the LCD screen.
3.
When prompted, enter the Wi-Fi password for your mobile hotspot network.
The Wi-Fi password displays on the mobile hotspot LCD screen. If the screen is
turned off, press and quickly release the Power button to wake the mobile hotspot.
Add a WPS-Enabled Wi-Fi Device From the Mobile Hotspot
Web Page
You can add a WPS-enabled Wi-Fi device to your Wi-Fi network without a Wi-Fi password,
using the mobile hotspot or the mobile hotspot web page.
To add a WPS-enabled Wi-Fi device from the mobile hotspot web page:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2.
Enter http://attwifimanager/ or http://192.168.1.1.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default login password is printed on the product label underneath the battery.
The password is case-sensitive.
The home page displays.
User Manual25Use Your Mobile Hotspot
AirCard 797S Mobile Hotspot