Table 2. Connection alerts (Continued)
Protocol error, unspecified111
Invalid Connection ID256
Invalid PRI NSAPI258
Invalid Field259
SNDCP Failure260
RAB Setup Failure261
No GPRS Context262
PDP Establish Max Timeout263
PDP Activate Max Timeout264
PDP Modify Max Timeout265
PDP Inactivate Max Timeout266
PDP Lower layer Error267
PDP Duplicate268
UE RAT Change269
Reset the Mobile Hotspot
You can reset the mobile hotspot to the factory settings. This is useful if you forgot your
admin login password for the mobile hotspot web page.
If you reset the mobile hotspot, all of your customizations are lost. If you want to keep
them, save them before doing the reset and restore them afterward. See Back Up and
Restore Mobile Hotspot Settings on page 54.
Note: When you reset the mobile hotspot, any currently connected devices lose access
and must be reconnected after the mobile hotspot restarts.
Reset the Mobile Hotspot From the Mobile Hotspot
Start with the mobile hotspot turned on.
To reset the mobile hotspot directly from the mobile hotspot:
1.
Press and hold the Power button for at least 15 seconds.
If Factory Reset via the Power button is enabled, the mobile hotspot enters factory
reset mode and first displays the message, "Shutting down," followed by the message
User Manual82Troubleshooting
AirCard 797S Mobile Hotspot
To Next Page
Loading...
