NETGEAR AirCard 797S

The default login password is printed on the product label underneath the battery.
The password is case-sensitive.
The home page displays.
4.
Select Settings > General > Software and Reset.
5. Click the Choose File button.
6.
Navigate to the location where the export.cfg file is stored and select it.
By default, mobile hotspot setting files are saved to your Downloads folder.
7. Click the Import button.
Your mobile hotspot is restored with the imported file settings.
Restore Mobile Hotspot Settings Using the LCD Display
If the system administrator has configured Factory Reset using the Power button, then
you can restore the mobile hotspot settings using the LCD display. Start with the mobile
hotspot turned on.
To restore mobile hotspot settings directly from the mobile hotspot:
1.
Press and hold the Power button for at least 15 seconds.
If Factory Reset by using the Power button is configured, then the mobile hotspot
enters factory reset mode and first displays the message, "Shutting down," followed
by the message "Continue holding Power button to reset all settings to factory
default," and then "Resetting Device. Please do not power off."
Note: If you release the power button too soon, the mobile hotspot turns off instead
of resetting.
User Manual56Maintain Your Mobile Hotspot
AirCard 797S Mobile Hotspot