NETGEAR AirCard 797S

Enable or Disable Factory Reset
Administrators have the ability to lock down the AC797S and prevent the end user from
starting an "unauthenticated" Factory Reset request. By default, a long press of the
AC797S power button resultst in a Factory Reset. Administrators can use the new controls
to disable this feature and prevent the end user from performing a factory reset with
the hardware button.
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2.
Enter http://attwifimanager/ or http://192.168.1.1.
3. Enter the administrator login password.
The default login password is printed on the product label underneath the battery.
The password is case-sensitive.
The home page displays.
4. Select the administrator login password.
5. Select Settings > General.
The General settings web page displays.
User Manual68Maintain Your Mobile Hotspot
AirCard 797S Mobile Hotspot