4. Select Settings > Router > Basic.
5. In the LAN section, select the IP Passthrough Mode Enabled radio button.
6. Click the Save button.
Note: Enabling IP pass-through will disable Wi-Fi.
Enable VPN Pass-Through
To connect to a corporate network using VPN, you must first enable VPN connections
(pass-through).
To enable VPN pass-through:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2.
Enter http://attwifimanager/ or http://192.168.1.1.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default login password is printed on the product label underneath the battery.
The password is case-sensitive.
The home page displays.
User Manual58Maintain Your Mobile Hotspot
AirCard 797S Mobile Hotspot
To Next Page
Loading...
