EasyManuals Logo

NETGEAR C3700 User Manual

NETGEAR C3700
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
Specify Network Settings
58
N600 WiFi Cable Modem Router Model C3700
Allow guest to see each other and access my local network. If this check box is
selected, anyone who connects to this SSID has access to your local network, not just
Internet access.
6. Give the guest network a name.
The guest network name is case-sensitive and can be up to 32 characters. You then
manually configure the wireless devices in your network to use the guest network name in
addition to the main SSID.
7. Select a radio button for a security option.
The WPA2 options use the newest standard for the strongest security, but some older
computers and wireless devices cannot use it. NETGEAR recommends that you select
the WPA-PSK [TKIP] + WPA2-PSK [AES] radio button. This setting protects your WiFi
network and lets computers and wireless devices can connect to the WiFi network by
using either WPA2 or WPA security.
8. Click the Apply button.
Your settings are saved.
Control the Wireless Radios
The modem router has an internal wireless radios that broadcasts signals in the 2.4 GHz
range and 5 GHz range. By default, these radios are on so that you can connect wirelessly to
the modem router. When the wireless radios are off, you can still use an Ethernet cable for a
LAN connection to the modem router.
You can turn the wireless radios on and off with the WiFi On/Off button on the modem router,
or you can log in to the modem router and enable or disable the wireless radios. If you are
close to the modem router, it might be easier to press its WiFi On/Off button. If you are away
from the modem router or have already logged in, it might be easier to enable or disable the
radios.
Use the WiFi On/Off Button
To turn the wireless radios off and on with the WiFi On/Off button:
Press the WiFi On/Off button on the modem router for two seconds.
If you turned off the wireless radios, the WiFi On/Off LED and the WPS LED turn off. If
you turned on the wireless radios, the WiFi On/Off LED and the WPS LED light.
Enable or Disable the Wireless Radios
If you used the WiFi On/Off button to turn off the wireless radios, you can’t log in to the
modem router to turn them back on. You must press the WiFi On/Off button again for two
seconds to turn the wireless radios back on.

Table of Contents

Other manuals for NETGEAR C3700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR C3700 and is the answer not in the manual?

NETGEAR C3700 Specifications

General IconGeneral
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)600 Mbit/s
WLAN data transfer rate (first band)300 Mbit/s
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Memory card slot(s)No
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Product typeTabletop router
Product colorBlack
Power source typeDC
Security algorithmsWPA, WPA2-PSK
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth41 mm
Width113 mm
Height193 mm
Weight352 g

Related product manuals