NETGEAR C3700 User Manual

Supplemental Information
99
N600 WiFi Cable Modem Router Model C3700
Factory Default Settings
You can return the modem router to its factory default settings.
 To restore the factory default settings:
1. Locate the small hole in the bottom of the modem router
.
The reset button is located inside this hole.
2. Use a paperclip or sharp object to press and hold the Reset button for over seven seconds.
Designed by NETGEAR in California
The modem router resets and returns to the factory settings shown in the following table.
Factory Default Settings
Gateway login User login URL http://192.168.0.1
User name and password
(case-sensitive)
admin / password
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
connection
WAN MAC address Use default hardware address

NETGEAR C3700 Specifications

General

Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	600 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Memory card slot(s)	No
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Product type	Tabletop router
Product color	Black
Power source type	DC
Security algorithms	WPA, WPA2-PSK
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	41 mm
Width	113 mm
Height	193 mm
Weight	352 g