Wireless Cable Voice Gateway Model CVG834G Reference Manual
1-8 Installing the Gateway
v2.0, November 2007
2. The Dynamic IP radio button is selected by default.
• If your service provider assigns your IP address through DHCP, leave the Dynamic IP
radio button selected.
• If your service provider assigned you a permanent, fixed (static) IP address for your PC,
select Static IP. Enter the IP address that your ISP assigned. Also enter the static IP mask
(also known as netmask), Gateway IP address and Domain Name Server (DNS) Address.
3. Click Apply to accept these settings.
4. If you have VoIP service, connect the phone to a Voice Port 1. If your service includes a
second line, you can connect that phone to Voice Port 2. To check the voice status, see
“Viewing and Emailing Event Logs” on page 4-3.
To set up a wireless connection, see Chapter 2, “Wireless Configuration”.
To Next Page
Loading...
