Wireless Cable Voice Gateway Model CVG834G Reference Manual
3-2 Protecting Your Network
v2.0, November 2007
2. Under the Maintenance heading, select Set Password. The Set Password screen appears:
3. To change the password, first enter the old password, and then enter the new password twice.
4. Click Apply to save your changes.
Logs
A log is a detailed record of the denial of service (DoS) attacks directed at your network. You can
view the logs here, or you can use e-mail notification to view the logs (see “Viewing and Emailing
Event Logs” in Chapter 4).
From the main menu, under the Content Filtering heading, select Logs. The Logs screen
appears:
Figure 3-2
Note: After changing the password, you will be required to log in again to continue
the configuration. If you have backed up the gateway settings previously, you
should do a new backup so that the saved settings file includes the new
password.
Figure 3-3
To Next Page
Loading...
