Wireless Cable Voice Gateway Model CVG834G Reference Manual
4-10 Managing Your Network
v2.0, November 2007
• Starting IP Address. Enter the first of the contiguous addresses in the address pool. The
default start address is 192.168.0.10.
• Ending IP Address. Enter the last of the contiguous addresses in the address pool. The
default end address is 192.168.0.19.
3. Click Apply to save your settings.
To configure DHCP server reservation parameters for your LAN:
1. Enter the MAC address of the PC for which you want to reserve an IP Address.
2. Enter a free IP Address for the PC.
3. CLick Add.
To remove a reserved IP from the DHCP Reservation Lease Info table:
1. Select the radio button adjacent to the entry that you want to remove from the table.
2. Click Delete.
The DHCP Client Lease details for all computers in the LAN gateway are shown in the DHCP
Client Lease Info table. To clear all DHCP Client leases, click Clear DHCP Leases.
.
Remote Management Access
You can use remote management to configure, upgrade, and check the status of your gateway
through the Internet.
To Next Page
Loading...
