Wireless Cable Voice Gateway Model CVG834G Reference Manual
Managing Your Network 4-9
v2.0, November 2007
• Secondary DNS Server, if you entered a Secondary DNS address in the Basic Settings page.
Configuring the LAN IP Settings
You can use the LAN IP Setup page to configure LAN IP services such as the IP address of the
gateway and DHCP.
To configure the LAN IP:
1. Under the Advanced heading on the main menu, select LAN IP. The LAN IP screen displays.
2. Enter the following information:
• LAN IP Address. The LAN IP address that you want to assign to your gateway. The
default is 192.168.0.1.
• Subnet Mask. The subnet mask for your network IP address. The default is
255.255.255.0. (Unless you are implementing subnetting, use the default subnet mask.)
• DHCP Server. To to assign IP addresses to your computers automatically, select Yes. To
disable the DHCP Server and assign IP addresses to your computers manually, select No.
Note: The gateway implements a DNS Relay function. When it receives a DNS request
on the LAN, it passes it to the DNS server specified on the WAN. It then relays the
response back to the original requesting PC.
Figure 4-8
Note: If you select no for the DHCP server setting, then you must assign a static
IP address to your PC in order to reconnect to the gateway and enable the
DHCP server again.
To Next Page
Loading...
