Wireless Cable Voice Gateway Model CVG834G Reference Manual
Protecting Your Network 3-7
v2.0, November 2007
To configure MAC Filtering:
1. Log in to the gateway at its default LAN address by entering http://192.168.0.1, the default
user name admin, and default password of password; or use whatever password and LAN
address you have chosen for the gateway.
2. Under the Advanced heading on the main menu, select MAC Filtering. The MAC Filtering
screen appears:
The Trusted Devices table is at the top of this screen. It shows devices that are currently connected
to the wireless voice gateway.
To add a device to the Trusted Devices table:
1. Select a device using one of the following methods:
• If the device is in the Trusted Devices table, click the radio button of that PC to capture is
MAC address.
• If the device is not in the Trusted Devices table, you can manually enter the MAC address
of the PC you want to block. If no Device Name appears when you enter its MAC address,
you can type a descriptive name in the Device Name field.
2. Click Add. The device appears in the Trusted Devices table.
Figure 3-6
To Next Page
Loading...
