Wireless Cable Voice Gateway Model CVG834G Reference Manual
3-14 Protecting Your Network
v2.0, November 2007
To assign a computer or server to be a DMZ host:
1. From the main menu, under the Advanced heading, select DMZ Host. The DMZ Host screen
appears:
2. In the DMZ Address field, enter the IP address of the computer that you want to assign as a
DMZ host.
3. Click Apply.
To disable the DMZ host, enter 0 (zero), and then click Apply.
If you want the gateway to respond to a ping from the Internet, select the Respond to Ping on
WAN Port check box. This should only be used as a diagnostic tool, since it allows your gateway
to be discovered. Do not select this check box unless you have a specific reason to do so.
Figure 3-10
To Next Page
Loading...
