Wireless Cable Voice Gateway Model CVG834G Reference Manual
Managing Your Network 4-13
v2.0, November 2007
To activate UPnP:
1. From the main menu, select UPnP. The UPnP screen displays:
2. Select the Turn UPnP On check box, and then click Apply.
To save, cancel or refresh the table:
• To save the new settings to the gateway router, click Apply.
• To disregard any unsaved changes, click Cancel.
• To update the UPnP Portmap table and to show the active ports that are currently opened by
UPnP devices, click Refresh.
Figure 4-10
To Next Page
Loading...
