NETGEAR EX3110 User Manual

To add a translated MAC address to your router:
1. Log in to your router and disable the MAC filter, wireless access control, or ACL.
For more information about how to disable your router’s MAC filter, wireless access control, or ACL,
see your router’s documentation.
2. Power on the extender and connect all of your WiFi devices to the extender.
3. Launch a web browser from a computer or mobile device that is connected to your extender network.
4. Log in to your extender:
• If your extender and router use different WiFi network names (SSIDs), enter www.mywifiext.net.
• If your extender and router use the same WiFi network name (SSID), enter http://<extender’s IP
address> (for example, http://192.168.1.3).
For more information about how to find your extender's IP address, see Find Extender's IP Address
on page 40.
A login page displays.
5. Enter your admin email and password and click the LOG IN button.
The Status page displays.
6.
If your browser displays the Menu icon , click it.
The extender menu displays.
7. Select Settings > Connected Devices.
The Connected Devices section displays the MAC addresses and virtual MAC addresses for computers
and WiFi devices that are connected to the extender network.
8. On the router, add the extender’s virtual MAC address and all the virtual MAC addresses connected to
the extender network to your router’s MAC filter table.
9. Enable the router’s MAC filter, wireless access control, or ACL.
Extender Network Settings
26
AC750 WiFi Range Extender

NETGEAR EX3110 Specifications

General

Type	Network transmitter & receiver
Maximum transfer distance	- m
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Networking standards	IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)	750 Mbit/s
Product color	White

Weight and Dimensions

Width	72.5 mm
Height	64.8 mm
Weight	152 g