FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
5-10 Configuring QoS
v1.0, December 2007
• Restore Defaults– Restore the DSCP Mapping device factory default values. The possible
field values are:
– Checked – Restore the factory default settings for DSCP mapping values.
– Unchecked – Maintain the current DSCP mapping settings.
2. Select the Queue values for each DSCP In value in the provided fields.
3. Check or uncheck the Restore Defaults box in the provided field.
4. Click Apply to update the device.
To Next Page
Loading...
