FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
Managing Security 6-11
v1.0, December 2007
• Guest VLAN ID – Select the guest VLAN ID from the list of the currently defined
VLANs.
2. Select Disable or Enable for the Port Based Authentication State in the provided field.
3. If you selected Enable for the Port Based Authentication State, then select the
Authentication Method from the list in the provided field.
4. Select Disable or Enable for the Guest VLAN status in the provided field.
5. If you selected Enable for the Guest VLAN field, then select the VLAN ID from the list in the
provided field.
6. Click Apply to update the device.
Port Authentication
The Port Authentication screen allows to configure port authentication interface parameters.
To configure port-based authentication global properties:
1. Click Security > Port Authentication > Advanced > Port Authentication. The Port
Authentication screen displays
The Port Authentication screen contains the following fields:
• Interface – Displays the interfaces.
• User Name – Displays the supplicant (client) user name, once the user is authenticated.
Figure 6-7
To Next Page
Loading...
