FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
6-14 Managing Security
v1.0, December 2007
To configure storm control:
1. Click Security > Traffic Control > Storm Control. The Storm Control screen displays:
The Storm Control screen contains the following fields:
• Interface – Displays the port number for which the storm control information is
displayed.
• Broadcast Control – Select whether storm control is enabled or disabled on the interface
according to Broadcast mode. The possible field values are:
– Enable – Enable storm control on the interface. This is the default value.
– Disable – Disable storm control on the interface.
• Broadcast Mode – Select the Broadcast mode on the interface. The possible field values
are:
– Multicast & Broadcast – Count Broadcast and Multicast traffic together.
– Broadcast Only – Count Broadcast traffic only.
Figure 6-8
To Next Page
Loading...
