FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
2-10 Introduction to the Web Browser Interface
v1.0, December 2007
4. Click again on the quick box, and the quick box and all the port boxes appear blank, marking
the ports as neither tagged nor untagged.
5. You may click on individual port boxes to toggle their tagged/untagged status
Interface View and Selection. A port or LAG interface may be selected from a table by using
the interface selection row, located above the row of column headers. Clicking on PORTS or
LAGS displays the ports or the LAGs:
Figure 2-13
To Next Page
Loading...
