FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
Managing System Settings 3-2
v1.0, December 2007
To configure system parameters:
1. Click System > Management > System Information. The System Information screen
displays:
The System Information screen contains the following fields:
• System Name – Enter the user-defined device name. The field may contain 0-160
characters.
• System Location – Enter the location where the system is currently running. The field
may contain 0-160 characters.
• System Contact – Enter the name of the contact person. The field may contain 0-160
characters.
• System Object ID – Displays the vendor’s authoritative identification of the network
management subsystem contained in the entity.
• Date & Time – Displays the current date and local time.
Figure 3-1
To Next Page
Loading...
