FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
3-5 Managing System Settings
v1.0, December 2007
• “SNTP Server Configuration”
Time Configuration
The Time Configuration screen contains information for defining both the local hardware clock
and the external SNTP clock. If the system time is managed via an external SNTP clock, and the
external SNTP clock fails, the system time reverts to the local hardware clock.
To configure the local system time:
1. Click System > Management > Time > Time Configuration. The Time Configuration
screen displays:
The Time Configuration screen contains the following fields:
• Clock Source – Select the source used to set the system clock. The possible field values
are:
– Local – The system time is set locally via the Date and Time fields.
– SNTP – The system time is set via an SNTP server. Select SNTP to disable the Date
and Time fields.
• Date – Enter the local system date. The field format is DD/MMM/YY (Day/Month/Year).
For example: 04/May/50 (May 4, 2050).
• Time – Enter the local system time. The field format is HH:MM:SS.
For example: 21:15:03.
Figure 3-3
To Next Page
Loading...
