FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
3-15 Managing System Settings
v1.0, December 2007
– SNMP Admin – User has access to all device configuration options, as well as
permissions to modify the community.
2. Select the community entry.
3. Enter the Management Station and Community String in the provided fields in the first row.
4. Select the Access Mode from the list in the provided field in the first row.
5. Click Apply to update the device.
To add a new SNMP community:
1. Click System > SNMP > SNMPv1/v2 > Community Configuration. The Community
Configuration screen displays.
2. Enter the Management Station and Community String in the provided fields in the first row.
3. Select the Access Mode from the list in the provided field in the first row.
4. Click Add to update the device.
To remove an SNMP community:
1. Click System > SNMP > SNMPv1/v2 > Community Configuration. The Community
Configuration screen displays.
2. Select the entry to be removed.
3. Click Delete to remove the entry.
Trap Configuration
The SNMPv1/v2 Trap Configuration screen contains information for defining filters that
determine whether traps are sent to specific users, and the trap type sent. SNMP notification filters
provide the following services:
• Identifying Management Trap Targets
• Defining Trap Filtering
• Defining Trap Generation Parameters
• Providing Access Control Checks
To Next Page
Loading...
