FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
4-2 Configuring Switching Settings
v1.0, December 2007
To configure port parameters:
1. Click Switching > Ports > Port Configuration. The Port Configuration screen displays:
The Port Configuration screen contains the following fields:
• Port – Displays the port number.
• Port Description – Enter a user-defined port description.
• Status – Select the port’s operational status. The possible field values are:
– Up – The port is operational.
– Down – The port is not operational.
• Reactivate Suspended – Select the reactivation status for a port disabled through the
locked port security option. The possible field values are:
– Enable – Enable reactivation.
– Disable – Disable reactivation.
Figure 4-1
To Next Page
Loading...
