FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
Configuring Switching Settings 4-13
v1.0, December 2007
LACP Port Priority
To configure LACP port priority:
1. Click Switching > LAG > Advanced > LACP Port Configuration. The LACP Port Priority
screen displays
The LACP Port Priority screen contains the following fields:
• Interface – Displays the interface number to which timeout and priority values are
assigned.
• LACP Priority – Enter the port priority value. The field range is 1-65535.
• Timeout – Select the administrative LACP timeout. The possible field values are:
– Long – A long timeout value (90 seconds). This is the default.
– Short – A short timeout value (3 seconds).
2. Select the interface.
3. Enter the LACP Priority and select the Timeout in the provided fields in the first row.
4. Click Apply to update the device.
Figure 4-9
To Next Page
Loading...
