FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
4-18 Configuring Switching Settings
v1.0, December 2007
To define VLAN group membership:
1. Click Switching > VLAN > Advanced > VLAN Membership. The VLAN Membership
screen displays:
The VLAN Membership screen contains the following fields:
• VLAN ID – Select the VLAN ID to be displayed and configured. VLAN ID = 1 cannot be
modified.
• VLAN Name – Displays the name of the VLAN.
• VLAN Type – Displays the VLAN type. The possible field values are:
– Static – The VLAN is user-defined.
– Default – The VLAN is the default VLAN. The default VLAN is enabled.
• Group Operation – Select the VLAN membership for all ports and LAGs. The possible
field values are:
– Tag All – Defines all selected interfaces as tagged VLAN members. Packets
belonging to the respective VLAN are tagged. The packets contain VLAN
information.
– Untag All – Defines all selected interfaces as untagged VLAN members. Packets
belonging to the respective VLAN are untagged.
– Remove All – Remove all the interfaces participating in the VLAN.
2. Select the VLAN ID from the list in the provided field.
Figure 4-12
To Next Page
Loading...
