FS728TP Smart Switch Software Administration Manual
3-26 Managing System Settings
v1.1, September 2009
3. Select the Group Name from the list in the provided field in the first row.
4. Click ADD to update the device.
To remove an SNMPv3 community:
1. Click System > SNMP > SNMPv3 > Community Configuration. The SNMPv3 Community
Configuration screen displays.
2. Select the community entry.
3. Click DELETE to remove the entry.
Group Configuration
The SNMPv3 Groups screen provides information for creating SNMP groups and assigning
SNMP access control privileges to SNMP groups. Groups allow network managers to assign
access rights to specific device features or feature aspects.
To define an SNMP group:
1. Click System > SNMP > SNMPv3 > Group Configuration. The SNMPv3 Groups screen
displays:
Figure 3-15
To Next Page
Loading...
