FS728TP Smart Switch Software Administration Manual
Managing System Settings 3-31
v1.1, September 2009
Global Trap Configuration
The SNMPv3 Global Trap Settings screen contains parameters for defining SNMP notification
parameters.
To configure SNMP notification global parameters:
1. Click System > SNMP > SNMPv3 > Global Trap Configuration. The SNMPv3 Global Trap
Settings screen displays:
The SNMPv3 Global Trap Settings screen contains the following fields:
• SNMP Notifications – Select whether or not the device can send SNMP notifications.
The possible field values are:
– Disable – Disables SNMP notifications.
– Enable – Enables SNMP notifications. The is the default value.
Figure 3-17
To Next Page
Loading...
