User Manual for the NETGEAR 10/100/1000 Mbps CardBus Adapter GA511
Configuration and Troubleshooting 4-3
Figure 4-1: Adapter Properties for Local Area Connection, General Tab
3. Select the Advanced tab to display the advanced configuration options. Be careful when
changing these settings. Incorrect Advanced settings can cause your GA511 to behave
unpredictably or not function.
4. Select the Property to configure, then click the drop-down arrow to set the Value.
5. Click OK when you have finished changing the configuration.
Troubleshooting
Use the information below to solve common problems you may encounter. Also, please refer to the
knowledge base on the NETGEAR Web site at http://ww.netgear.com/support/main.asp.
If you have problems with accessing network resources, the Windows software might not be
installed and configured properly on your computers. Please refer to Appendix B, “Preparing Your
PCs for Network Access”.
To Next Page
Loading...
Need help?
General