NETGEAR GA511

Technical Specifications A-1
Appendix A
Technical Specifications
This appendix provides technical specifications for the NETGEAR 10/100/1000 Mbps Gigabit
CardBus Adapter GA511
.
Technical Specifications for the GA511
Cable Specifications for the GA511 (10/100/1000BASE-T)
• Port type: 10/100/1000BASE-T
• Connector: RJ-45
• Media: CAT 5 UTP/CAT 5e UTP
• Maximum Distance: 325 feet (100 meters)
Note: 1000BASE-T signaling requires four twisted pairs of Category 5 balanced cabling, as
specified in ISO/IEC 11801:1995 and ANSI/EIA/TIA-568-A (1995) and tested for additional
performance using testing procedures defined in TIA/EIA TSB95.
Standards Compatibility IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u Auto Negotiation
IEEE 802.1Q VLAN
GA511Network Connection RJ-45 connector for Category 5 UTP cable
Full-duplex 2000 Mbps (1000 Mbps each way) Gigabit Ethernet
Host Connection 32-bit, 33 MHz CardBus slot
DC Operating Voltage +3.3V +/- 5%
Power Consumption 0.5 watts, maximum
Dimensions W 111.3 x D 54.0 x H 14.2 mm (4.38 x 2.13 x 0.56 in.)
Weight 55 g (1.94 oz)
Operating Temperature 0º to 55º C
Storage Temperature -10 degrees to 70 degrees
Operating Humidity 10% to 90% noncondensing
Agency Compliance FCC Class B, CE mark, VCCI, C-Tick