EasyManuals Logo

NETGEAR GS108Tv3 User Manual

NETGEAR GS108Tv3
492 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure System Information User Manual91
light. Transition to low power mode does not change the link status. Frames in transit are
not dropped or corrupted in transition to and from low power mode. Transition time is
transparent to upper layer protocols and applications.
10. Click the Apply button.
Your settings are saved.
Use the Device View
For information about the device view, see Use the Device View of the local browser
interface on page 40.
Configure Power over Ethernet
For models GS110TPv3 and GS110TPP, you can configure the global Power over Ethernet
(PoE) configuration settings and the PoE settings for each port.
Note: For more information about PoE, see the hardware installation guide,
which you can download by visiting netgear.com/support/download/.
PoE concepts
Models GS110TPv3 and GS110TPP include eight PoE plus (PoE+) ports.
The following table shows the capacity for each model.
Table 19. PoE capacities for models GS110TPv3 and GS110TPP
Model Maximum PoE Power
Per Individual Port
Maximum Power Budget Across
All Active PoE+ Ports
GS110TPv3 30W PoE+ (IEEE 802.3at) 55W
GS110TPP 30W PoE+ (IEEE 802.3at) 120W.
By default, supplied power is prioritized in ascending port order, up to the total power budget
of the device. If the power requirements for the attached devices exceed the total power
budget of the switch, the power to the device on the highest-numbered PoE+ port is disabled
Note: By purchasing and connecting the
NETGEAR optional power adapter model
EPS200W, you can upgrade the PoE
power budget to 190W.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS108Tv3 and is the answer not in the manual?

NETGEAR GS108Tv3 Specifications

General IconGeneral
Multicast supportYes
IPv4 multicast entries32
Number of multicast groups filtered256
Switch typeManaged
Switch layerL2
Data link protocolsEthernet, Fast Ethernet, Gigabit Ethernet
Supported network protocolsHTTP, HTTPS
Power connectorDC-in jack
Installed SFP modules quantity-
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
StackableNo
CertificationCE, FCC, VCCI Class B, C-Tick
Product colorGray
LED indicatorsActivity, LAN, Link, PoE, Power, Speed
Number of VLANs64
Networking standardsIEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-TX
Memory typeRAM
Flash memory32 MB
Internal memory128 MB
Processor frequency500 MHz
Mean time between failures (MTBF)2388657 h
MAC address table8000 entries
Packet buffer memory0.5 MB
Heat dissipation18.66 BTU/h
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
DHCP featuresDHCP client
Security algorithms802.1x RADIUS
Access Control List (ACL) IPv6 entries100
Input current1.25 A
AC input voltage100 - 240 V
DC input voltage54 V
AC input frequency50 - 60 Hz
Power consumption (max)5.5 W
Package typeBox
Package depth270 mm
Package width226 mm
Package height64 mm
Package weight780 g
Master (outer) case width214 mm
Master (outer) case height312 mm
Master (outer) case length474 mm
Master (outer) case weight5490 g
Harmonized System (HS) code85176990
Quantity per master (outer) case6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth101 mm
Width158 mm
Height27 mm
Weight43000 g

Related product manuals