NETGEAR GS110 User Manual

Specify the Voice VLAN Properties..............................................38
Enable the Voice VLAN Mode for Ports......................................39
Manage the OUI Table..................................................................40
Chapter 4 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-Based Quality of Service..............................43
Configure Port-Based Quality of Service.........................................44
Set Up Rate Limiting...........................................................................45
Set Up Broadcast Filtering.................................................................46
Chapter 5 Manage Network Settings
Specify IP Address Settings for the Switch......................................49
Use the Local Browser Interface to Specify the Switch IP
Address...........................................................................................49
Use the ProSAFE Plus Utility to Specify the Switch IP Address.50
Manage Switch Discovery Protocols................................................50
Manage Universal Plug and Play..................................................51
Manage Bonjour.............................................................................52
Manage NETGEAR Switch Discovery Protocol...........................52
Manage Multicast Traffic With IGMP Snooping..............................53
Customize IGMP Snooping...........................................................54
Specify a VLAN for IGMP Snooping.............................................55
Set Up Link Aggregation...................................................................56
Set Up a Static Link Aggregation Group.....................................56
Set Up a Link Aggregation Control Protocol Group.................57
Set Up the LACP System Priority for the Switch.........................59
Set Up LACP Port Priority and Time-Out Values........................59
Chapter 6 Manage and Monitor the Switch
Manage Flow Control........................................................................62
Manage the Port Speed and the Port Status...................................62
Enable Loop Prevention....................................................................64
Manage the Power Saving Mode.....................................................64
Manually Download and Upgrade the Firmware...........................65
Reboot the Switch...............................................................................66
Save the Switch Configuration..........................................................67
Restore a Saved Switch Configuration.............................................67
Return the Switch to Its Factory Default Settings............................68
Use the Factory Defaults Button to Reset the Switch................69
Use the Local Browser Interface to Reset the Switch.................69
Enable Port Mirroring.........................................................................70
View Switch Information or Change the Switch Device Name.....71
View or Clear the Port Statistics........................................................71
4
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX

NETGEAR GS110 Specifications

General

Brand	NETGEAR
Model	GS110
Category	Switch
Language	English