NETGEAR GS110T User Manual

5
0
0. About This Manual
The NETGEAR
®
ProSafe
TM
GS110T Hardware Installation Guide describes how to install
and power on the GS110T Smart Switch. The information in this manual is intended for
readers with intermediate computer and Internet skills.
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following
paragraphs:
• Typographical Conventions. This manual uses the following typographical
conventions:
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
• Formats. This manual uses the following formats to highlight special messages:
Tip: This format is used to highlight a procedure that will save
time or resources.
Ignoring this type of note may result in a
malfunction or damage to the equipment.
Note: This format is used to highlight information of
importance or special interest.
WARNING:

NETGEAR GS110T Specifications

General

Model	GS110T
Managed	Yes
Power over Ethernet (PoE)	No
Category	Switch
MAC Address Table Size	8000 entries
Jumbo Frame Support	9K packet size
VLAN Support	Yes
Quality of Service (QoS)	Yes
Operating Temperature	0° to 40° C (32° to 104° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Humidity	90% maximum relative humidity, noncondensing
Voltage	100-240V AC, 50-60Hz