EasyManuals Logo

NETGEAR GS308T Hardware Installation Guide

NETGEAR GS308T
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Eight independent 10/100/1000BASE-T RJ-45 PoE+ ports (1–8, see RJ-45 ports for
10/100/1000M BASE-T Ethernet connectivity on page 16), each with a left LED that
functions as the combined link, speed, and activity LED and a right LED that indicates
the PoE status (see Model GS310TP: LEDs on page 14).
Two dedicated Gigabit SFP fiber ports (9F and 10F) that can accept optional
transceiver modules (see Model GS310TP: SFP ports for fiber connectivity on page
15), each with a single LED that functions as the combined link and activity LED (see
Model GS310TP: LEDs on page 14).
Model GS310TP: Back panel
The back panel of model GS310TP contains a Kensington lock slot for an optional
security cable, air ventilation holes, and a 54V, 1.25A DC power connector for the DC
power adapter with detachable power cable that came in the switch package.
The following figure shows the back panel of model GS310TP.
Figure 4. Model GS310TP back panel
Model GS310TP: LEDs
This section describes the LED designations of model GS310TP.
Table 2. Model GS310TP LEDs on the front panel
DescriptionLED
Solid green. The switch is powered on and operating normally.
Solid yellow. The switch is booting.
Off. Power is not supplied to the switch.
Power LED
Off. Sufficient (more than 7W of) PoE power is available.
Solid yellow. Less than 7W of PoE power is available.
Blinking yellow. At least once during the previous two minutes, less than 7W of PoE
power was available.
PoE Max LED
Hardware Installation Guide14Hardware Overview
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch

Other manuals for NETGEAR GS308T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS308T and is the answer not in the manual?

NETGEAR GS308T Specifications

General IconGeneral
Switch typeManaged
Switch layerL2
Quality of Service (QoS) supportYes
Master (outer) case width214 mm
Master (outer) case height312 mm
Master (outer) case length474 mm
Master (outer) case weight6110 g
Harmonized System (HS) code85176990
Quantity per master (outer) case6 pc(s)
Package typeBox
Package depth270 mm
Package width226 mm
Package height64 mm
Package weight750 g
Cables includedAC
Power connectorDC-in jack
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
StackableNo
Product colorBlack
LED indicatorsActivity, Link, Power
Country of originChina
10G support-
Multicast protocolsIGMP
Input current1 A
DC input voltage12 V
MAC address table- entries

Related product manuals