NETGEAR GS308T Hardware Installation Guide

Step 9: Manage the switch
The switch contains built-in web browser–accessible software for viewing, changing,
and monitoring the way it functions. This management software is not required for the
switch to work. You can use the ports without using the management software. However,
the management software enables the setup of VLAN and trunking features and also
improves the efficiency of the switch, which results in the improvement of its overall
performance as well as the performance of the network.
After you power on the switch for the first time, you can configure the switch using the
local browser interface for advanced setup and configuration of features, or the Smart
Control Center program (which requires a Windows-based computer) for very basic
setup. For more information about managing the switch, including information about
tools to discover the switch IP address in your network, see the user manual, which you
can download from netgear.com/support/download/.
Note: The switch’s default IP address is 192.168.0.239 and its default subnet mask is
255.255.255.0. By default, the DHCP client of the switch is enabled.
Hardware Installation Guide26Installation
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch

NETGEAR GS308T Specifications

General

Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Yes
Master (outer) case width	214 mm
Master (outer) case height	312 mm
Master (outer) case length	474 mm
Master (outer) case weight	6110 g
Harmonized System (HS) code	85176990
Quantity per master (outer) case	6 pc(s)
Package type	Box
Package depth	270 mm
Package width	226 mm
Package height	64 mm
Package weight	750 g
Cables included	AC
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Stackable	No
Product color	Black
LED indicators	Activity, Link, Power
Country of origin	China
10G support	-
Multicast protocols	IGMP
Input current	1 A
DC input voltage	12 V
MAC address table	- entries