NETGEAR GS308T Hardware Installation Guide

1
Introduction
This hardware installation guide is for the following NETGEAR switches:
•
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch (GS308T)
This model provides eight Gigabit RJ-45 copper ports.
•
S350 Series 8-Port Gigabit PoE+ Ethernet Smart Managed Pro Switch with 2 SFP
Ports (GS310TP)
This model provides eight Gigabit PoE+ RJ-45 copper ports and two dedicated SFP
fiber ports. Power over Ethernet (PoE) lets you provide power to PoE-capable devices
such as WiFi access points, VoIP phones, and IP security cameras so that you do not
need to use power supplies for those devices. The switch can supply up to 30W
PoE+ (IEEE 802.3at) to each copper port, with a maximum PoE power budget of
55W across all active PoE+ copper ports.
This hardware installation guide complements the installation guide that came with your
switch.
This chapter serves as an introduction to the switch and includes the following sections:
• Overview
• Features
• Safety Instructions and Warnings
Note: For more information about the topics that are covered in this manual, visit the
support website at netgear.com/support/.
Note: For technical specifications, see the data sheet at
netgear.com/business/products/switches/smart/. For switch documentation, visit
netgear.com/support/download/.
5

NETGEAR GS308T Specifications

General

Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Yes
Master (outer) case width	214 mm
Master (outer) case height	312 mm
Master (outer) case length	474 mm
Master (outer) case weight	6110 g
Harmonized System (HS) code	85176990
Quantity per master (outer) case	6 pc(s)
Package type	Box
Package depth	270 mm
Package width	226 mm
Package height	64 mm
Package weight	750 g
Cables included	AC
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Stackable	No
Product color	Black
LED indicators	Activity, Link, Power
Country of origin	China
10G support	-
Multicast protocols	IGMP
Input current	1 A
DC input voltage	12 V
MAC address table	- entries