Manage the Switch
61
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
6. Select Switch Information.
7. For each port, click a Flow Control button to toggle between Disable and Enable.
8. Click the Apply button.
Your settings are saved.
Port Speed
By default on all ports, the port speed is set to Auto. With this setting, the speed is
determined using autonegotiation with the link partner. You can select a port speed setting for
each port, or disable a port to shut it down manually.
Use Browser-Based Access to Specify the Port Speed
To view information about the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 14.
The login window opens.
4. Enter the switch’
s password in the password field.
The switch’s default password is password.
To Next Page
Loading...
Need help?
General
