5
19-Inch Rack Mounting
Use the rack-mount kit supplied with your switch.
1. Use the Phillips head screws to fasten the mounting brackets to
the sides of the switch. Tighten the screws with a No. 1 Phillips
screwdriver.
2. Align the bracket and rack holes. Use two pan-head screws with
nylon washers to fasten each bracket to the rack. Tighten the
screws with a No. 2 Phillips screwdriver to secure the switch in the
rack.
Full_IG.book Page 5 Monday, January 9, 2012 6:11 PM
To Next Page
Loading...
