To Next Page

To Previous Page

Factory Default Settings

You can reset the modem to the factory default settings, which are shown in the following table.

For more information about resetting the modem to its factory default settings, see Return the Modem to Its

Factory Default Settings on page 59.

Table 10. LB1120 and LB1121 modem factory default settings

Default SettingsFeature

http://192.168.5.1User login URL

The modem does not require an admin user name.Admin user name

See the modem label.Login password (case-sensitive)

Local area network (LAN)

192.168.5.1LAN IP address

255.255.255.0Subnet mask

Router mode enabled; Bridge mode disabledOperation mode

Disabled in Router mode; enabled in Bridge modeIP pass-through (IPPT)

Enabled with the following address range:

192.168.5.20 to 192.168.5.99

DHCP server

AutoDNS mode

Disabled.

If enabled, the default DMZ IP address is 192.168.5.4

DMZ

Mobile broadband and security

All bandsNetwork mode

Always except when roaming (The modem automatically attempts to connect

to the mobile broadband network when powered on, except when roaming.)

Auto Connect mode

Automatic (The modem connects automatically to the type of mobile broadband

network that is made available by your mobile broadband service provider.)

Network Selection mode

1430 (nonconfigurable)MTU size

Disabled in Router mode; enabled in Bridge modeIP pass-through (IPPT)

EnabledNAT

EnabledVPN pass-through

Default Settings and Specifications

LTE Modem LB1120 and LB1121

NETGEAR LB1121 User Manual

Questions and Answers: