NETGEAR N600 WNDR3400v3 - Page 48

genie Advanced Home
48
N600 Wireless Dual Band Router WNDR3400v3
11. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
QoS for a Router LAN Port
 To create a QoS policy for a device connected to one of the router’s LAN ports:
1. Select Advance
d > Setup > QoS Setup to display the QoS Setup screen. Select the
Turn Internet Access QoS On check box.
2. Click the Setup QoS
Rule button.
3. Click the Add Prio
rity Rule button.
4. From
the Priority Category list, select Ethernet LAN Port. The following screen appears:
5. From the LAN port list, select the LAN port you want to create a QoS policy for.
6. From
the Priority list, select the priority that this port’s traffic should receive relative to other
applications and traffic when accessing the Internet. The options are Low, Normal, High, and
Highest.
7. Click Apply
to save this rule to the QoS Policy list and return to the QoS Setup screen.
8. In
the QoS Setup screen, click Apply.
QoS for a MAC Address
 To create a QoS policy for traffic from a specific MAC address:
1. Select Advance
d > Setup > QoS Setup, and click the Setup QoS Rule button. The
QoS Setup screen displays.
2. Click Add Priority
Rule.